发新话题
打印

m0n0 优秀插件整合 [12月25日更新]

m0n0 优秀插件整合 [12月25日更新]

【转帖请注明 www.m0n0china.org 字样】

【12月25日】更新说明:

1、修复上一版本大内存使用问题

2、将1.235纳入更新范围 扩大分区 扩展功能同1.233

3、1.235使用 流量查看1.4a

4、将版本重新控制  各版本详细说明见下表

官方内核:
generic-pc-1.233.img
generic-pc-1.235.img   

官方内核  串口控制:
generic-pc-1.233-com.img
generic-pc-1.235-com.img   

1GB以上内存使用 30W 表:
generic-pc-1.233-GB.img
generic-pc-1.235-GB.img      

1GB以上内存使用 30W 表 串口控制:
generic-pc-1.233-com-GB.img
generic-pc-1.235-com-GB.img   

512M 及以下内存使用的30W表:
kernel.gz
kernel-smp.gz         

1GB 及以上内存使用的30W表:
kernel-GB.gz
kernel-smp-GB.gz      

【7月20日】更新说明:
将30W内核(包括smp)更新到p26

【3月17日】更新说明:
修复上一版本  pptp  连接问题
把掩码改为正确的 25  客户128个

【3月16日】更新说明:
修复上一版本更改默认管理端口后
入网门户修改密码界面无法显示问题
在此感谢热心的坛友们~~


优秀插件整合版M0N01.233采用1.233SC汉化版版本为基础
主页添加平台信息、系统版本、系统时间、总连接数(TCP、UDP、ICMP)、CPU使用情况。
添加了wuxj开发的流量查看程序1.3  (做少许修改)
添加了AI开发的连接数查看8.3   (做少许修改)
添加shellcmd 1.07  (做少许修改)
添加了大猫开发的单IP限速及集体限速 (对应为简单设置、高级设置) (做少许修改)
添加了入网门户用户自己能改密码的功能
修改VPN最大连接数为100,子网为/24
扩大分区。。。
另附验证界面、串口控制版本、30万内核(包括支持SMP)

本帖隐藏的内容需要回复才可以浏览


          MD5指纹:  
                 D4AEC2E7983666FC90E975E78A3E58C3  kernel-smp.gz
                 76B547C1803A8BEFE1092C714B19F29D  kernel.gz
                 C780B8C1733A3E77F2583D0C8B6D27C9  kernel-smp-GB.gz
                 8E99FCD0B5051431F3F9E8280F678F37  kernel-GB.gz
                 2E40533BBBE1AB96167CF8478A385848  generic-pc-1.233.img
                 C22F150719149D16F7D5E6491365FF5D  generic-pc-1.233-com.img
                 81D7AD303C645A467266152288C63808  generic-pc-1.233-GB.img
                 D0679B7394A29159E80BB68B96E2F876  generic-pc-1.233-com-GB.img
                 16C4E82781E5A4329EFD83DA692360C0  generic-pc-1.235.img
                 2BE97EDBFEA8890A9161D05927A9D7C2  generic-pc-1.235-com.img
                 1BBBA3232332BE9814C988490D638B5C  generic-pc-1.235-GB. img
                 5276BCC33B65C8CCD246EEB1BBAAE003  generic-pc-1.235-com-GB.img
               
内核使用说明:

若需要更新内核,按顺序执行以下步骤:

1、打开 http://m0n0ip/exec.php

2、上传内核文件 比如 kernel-30W.gz

    进入exec.php 上传新的内核文件 看到上传成功的提示!!  

    切忌   原版的m0n0分区大小是不够的  所以 你上传内核会失败   

    导致整个升级过程失败并且内核文件丢失!!!!

    我修改过的版本是扩大了分区的  自己可以 df 检查下。。


3、exec.php 里执行(注意命令中的空格)
       ①、 umount /cf && mount -rw /cf   
            这条命令就是卸载只读的/cf并且重新挂载可写的/cf
     ②、 rm /cf/kernel.gz   
            删除/cf下面就的内核文件
     ③、 mv /tmp/kernel-30W.gz /cf/kernel.gz   
             将通过exec.php上传到/tmp下的新内核文件移动到/cf下面  注意这里的文件名  
             kernel-30W.gz  是刚刚上传上去的内核文件 有些时候win系统看不到扩展名
             这需要你自己手动调出来 (不会调的百度找下)
      ④、 chmod 755 /cf/kernel.gz
             更改文件属性(此步骤忽略亦可)
      ⑤、 umount /cf && mount /cf
             重新挂载/cf  成为只读

4、 重新启动 m0n0  检查内核信息。

以上是完整步骤  一定要仔细看过再实际操作!!!造成一切损失本人概不负责!!!!

[ 本帖最后由 王国梁 于 2009-9-27 07:00 PM 编辑 ]
附件: 您所在的用户组无法下载或查看附件

TOP

附上内核编译代码

都加入了DROPSYN选项  扩大连接至30W
引用:
firewall_generic:

# $Id$
machine  i386
cpu   I486_CPU
cpu   I586_CPU
cpu   I686_CPU
ident  firewall_generic
maxusers 0
options  INCLUDE_CONFIG_FILE
#makeoptions DEBUG=-g  #Build kernel with gdb(1) debug symbols
makeoptions MODULES_OVERRIDE="dummynet if_tap if_vlan ipfw"
options  INET   #InterNETworking
options  FAST_IPSEC
options  FFS   #Berkeley Fast Filesystem
options  FFS_ROOT  #FFS usable as root device [keep this!]
options  SOFTUPDATES  #Enable FFS soft updates support
options  MFS   #Memory Filesystem
options  MD_ROOT   #MD is a potential root device
options  MSDOSFS   #MSDOS Filesystem
options  CD9660   #ISO 9660 Filesystem
options  CD9660_ROOT  #CD-ROM usable as root, CD9660 required
options  PROCFS   #Process filesystem
options  COMPAT_43  #Compatible with BSD 4.3 [KEEP THIS!]
options  SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options  UCONSOLE  #Allow users to grab the console
options  KTRACE   #ktrace(1) support
options  SYSVSHM   #SYSV-style shared memory
options  SYSVMSG   #SYSV-style message queues
options  SYSVSEM   #SYSV-style semaphores
options  P1003_1B  #Posix P1003_1B real-time extensions
options  _KPOSIX_PRIORITY_SCHEDULING
options  ICMP_BANDLIM  #Rate limit bad replies
options  KBD_INSTALL_CDEV # install a CDEV entry in /dev
options  HZ=1000
options  IPFILTER
options  IPFILTER_LOG
options  IPFILTER_DEFAULT_BLOCK
options  IPSTATE_SIZE=399983
options  IPSTATE_MAX=279991
options  IPFILTER_MSSCLAMP_FORCE
options  IPFIREWALL_DEFAULT_TO_ACCEPT
options         TCP_DROP_SYNFIN
options  BRIDGE
options  DEVICE_POLLING
options  NO_SWAPPING
device  isa
device  eisa
device  pci
# Floppy drives
device  fdc0 at isa? port IO_FD1 irq 6 drq 2
device  fd0 at fdc0 drive 0
device  fd1 at fdc0 drive 1
# ATA and ATAPI devices
device  ata0 at isa? port IO_WD1 irq 14
device  ata1 at isa? port IO_WD2 irq 15
device  ata
device  atadisk   # ATA disk drives
device  atapicd   # ATAPI CDROM drives
device  atapifd   # ATAPI floppy drives
device  atapist   # ATAPI tape drives
options  ATA_STATIC_ID  #Static device numbering
# SCSI Controllers
device  ahb  # EISA AHA1742 family
device  ahc  # AHA2940 and onboard AIC7xxx devices
device  ahd  # AHA39320/29320 and onboard AIC79xx devices
device  amd  # AMD 53C974 (Tekram DC-390(T))
device  isp  # Qlogic family
device  mpt  # LSI-Logic MPT/Fusion
device  ncr  # NCR/Symbios Logic
device  sym  # NCR/Symbios Logic (newer chipsets)
options  SYM_SETUP_LP_PROBE_MAP=0x40
    # Allow ncr to attach legacy NCR devices when
    # both sym and ncr are configured
device  adv0 at isa?
device  adw
device  bt0 at isa?
device  aha0 at isa?
device  aic0 at isa?
device  ncv  # NCR 53C500
device  nsp  # Workbit Ninja SCSI-3
device  stg  # TMC 18C30/18C50
# SCSI peripherals
device  scbus  # SCSI bus (required)
device  da  # Direct Access (disks)
device  sa  # Sequential Access (tape etc)
device  cd  # CD
device  pass  # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device  atkbdc0 at isa? port IO_KBD
device  atkbd0 at atkbdc? irq 1 flags 0x1
device  vga0 at isa?
# syscons is the default console driver, resembling an SCO console
device  sc0 at isa? flags 0x100
# Floating point support - do not disable.
device  npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device  apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device  card
device  pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device  pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device  sio0 at isa? port IO_COM1 flags 0x10 irq 4
device  sio1 at isa? port IO_COM2 irq 3
device  sio2 at isa? disable port IO_COM3 irq 5
device  sio3 at isa? disable port IO_COM4 irq 9
# PCI Ethernet NICs.
device  de  # DEC/Intel DC21x4x (``Tulip'')
device  txp  # 3Com 3cR990 (``Typhoon'')
device  vx  # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device  miibus  # MII bus support
device  bfe  # Broadcom BCM4401 10/100.
device  dc  # DEC/Intel 21143 and various workalikes
device  fxp  # Intel EtherExpress PRO/100B (82557, 82558)
device  my  # Myson Fast Ethernet (MTD80X, MTD89X)
device  pcn  # AMD Am79C97x PCI 10/100 NICs
device  rl  # RealTek 8129/8139
device  sf  # Adaptec AIC-6915 (``Starfire'')
device  sis  # Silicon Integrated Systems SiS 900/SiS 7016
device  ste  # Sundance ST201 (D-Link DFE-550TX)
device  tl  # Texas Instruments ThunderLAN
device  tx  # SMC EtherPower II (83c170 ``EPIC'')
device  vr  # VIA Rhine, Rhine II
device  wb  # Winbond W89C840F
device  xl  # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Gigabit Ethernet NICs.
device  bge  # Broadcom BCM570x (``Tigon III'')
device  em  # Intel Pro/1000 (82542,82543,82544,82540)
device  gx  # Intel Pro/1000 (82542, 82543)
device  lge  # Level 1 LXT1001 (``Mercury'')
device  nge  # NatSemi DP83820 and DP83821
device  sk  # SysKonnect GEnesis
device  ti  # Alteon (``Tigon I'', ``Tigon II'')
device  wx
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device  ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
device  ex
device  ep
device  fe0 at isa? disable port 0x300
# Xircom Ethernet
device  xe
# PRISM I IEEE 802.11b wireless NIC.
device  awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device  wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device  an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device  ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device  le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
device  lnc0 at isa? disable port 0x280 irq 10 drq 0
device  cs0 at isa? disable port 0x300
device  sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop  # Network loopback
pseudo-device ether  # Ethernet support
pseudo-device tun  # Packet tunnel.
pseudo-device pty  # Pseudo-ttys (telnet etc)
pseudo-device md  # Memory "disks"
pseudo-device gif  # IPv6 and IPv4 tunneling
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf  #Berkeley packet filter
# USB support
device  uhci  # UHCI PCI->USB interface
device  ohci  # OHCI PCI->USB interface
device  usb  # USB Bus (required)
device  ugen  # Generic
device  uhid  # "Human Interface Devices"
device  ukbd  # Keyboard
device  umass
# USB Ethernet, requires mii
device  aue  # ADMtek USB ethernet
device  cue  # CATC USB ethernet
device  kue  # Kawasaki LSI USB ethernet
device  rue
options  NETGRAPH  #netgraph(4) system
options  NETGRAPH_ASYNC
options  NETGRAPH_BPF
options  NETGRAPH_ETHER
options  NETGRAPH_IFACE
options  NETGRAPH_KSOCKET
options  NETGRAPH_L2TP
options  NETGRAPH_MPPC_ENCRYPTION
options  NETGRAPH_PPP
options  NETGRAPH_PPPOE
options  NETGRAPH_PPTPGRE
options  NETGRAPH_SOCKET
options  NETGRAPH_TEE
options  NETGRAPH_UI
options  NETGRAPH_VJC
pseudo-device crypto
pseudo-device cryptodev
device        hifn
引用:
firewall_generic_smp:

# $Id$
machine  i386
cpu   I486_CPU
cpu   I586_CPU
cpu   I686_CPU
ident  firewall_generic_smp
maxusers 0
options  INCLUDE_CONFIG_FILE
#makeoptions DEBUG=-g  #Build kernel with gdb(1) debug symbols
makeoptions MODULES_OVERRIDE="dummynet if_tap if_vlan ipfw"
options  INET   #InterNETworking
options  FAST_IPSEC
options  FFS   #Berkeley Fast Filesystem
options  FFS_ROOT  #FFS usable as root device [keep this!]
options  SOFTUPDATES  #Enable FFS soft updates support
options  MFS   #Memory Filesystem
options  MD_ROOT   #MD is a potential root device
options  MSDOSFS   #MSDOS Filesystem
options  CD9660   #ISO 9660 Filesystem
options  CD9660_ROOT  #CD-ROM usable as root, CD9660 required
options  PROCFS   #Process filesystem
options  COMPAT_43  #Compatible with BSD 4.3 [KEEP THIS!]
options  SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options  UCONSOLE  #Allow users to grab the console
options  KTRACE   #ktrace(1) support
options  SYSVSHM   #SYSV-style shared memory
options  SYSVMSG   #SYSV-style message queues
options  SYSVSEM   #SYSV-style semaphores
options  P1003_1B  #Posix P1003_1B real-time extensions
options  _KPOSIX_PRIORITY_SCHEDULING
options  ICMP_BANDLIM  #Rate limit bad replies
options  KBD_INSTALL_CDEV # install a CDEV entry in /dev
options  HZ=1000
options  IPFILTER
options  IPFILTER_LOG
options  IPFILTER_DEFAULT_BLOCK
options  IPSTATE_SIZE=399983
options  IPSTATE_MAX=279991
options  IPFILTER_MSSCLAMP_FORCE
options  IPFIREWALL_DEFAULT_TO_ACCEPT
options         TCP_DROP_SYNFIN
options  BRIDGE
options  NO_SWAPPING
options         SMP
options         APIC_IO
device  isa
device  eisa
device  pci
# Floppy drives
device  fdc0 at isa? port IO_FD1 irq 6 drq 2
device  fd0 at fdc0 drive 0
device  fd1 at fdc0 drive 1
# ATA and ATAPI devices
device  ata0 at isa? port IO_WD1 irq 14
device  ata1 at isa? port IO_WD2 irq 15
device  ata
device  atadisk   # ATA disk drives
device  atapicd   # ATAPI CDROM drives
device  atapifd   # ATAPI floppy drives
device  atapist   # ATAPI tape drives
options  ATA_STATIC_ID  #Static device numbering
# SCSI Controllers
device  ahb  # EISA AHA1742 family
device  ahc  # AHA2940 and onboard AIC7xxx devices
device  ahd  # AHA39320/29320 and onboard AIC79xx devices
device  amd  # AMD 53C974 (Tekram DC-390(T))
device  isp  # Qlogic family
device  mpt  # LSI-Logic MPT/Fusion
device  ncr  # NCR/Symbios Logic
device  sym  # NCR/Symbios Logic (newer chipsets)
options  SYM_SETUP_LP_PROBE_MAP=0x40
    # Allow ncr to attach legacy NCR devices when
    # both sym and ncr are configured
device  adv0 at isa?
device  adw
device  bt0 at isa?
device  aha0 at isa?
device  aic0 at isa?
device  ncv  # NCR 53C500
device  nsp  # Workbit Ninja SCSI-3
device  stg  # TMC 18C30/18C50
# SCSI peripherals
device  scbus  # SCSI bus (required)
device  da  # Direct Access (disks)
device  sa  # Sequential Access (tape etc)
device  cd  # CD
device  pass  # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device  atkbdc0 at isa? port IO_KBD
device  atkbd0 at atkbdc? irq 1 flags 0x1
device  vga0 at isa?
# syscons is the default console driver, resembling an SCO console
device  sc0 at isa? flags 0x100
# Floating point support - do not disable.
device  npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device  apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device  card
device  pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device  pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device  sio0 at isa? port IO_COM1 flags 0x10 irq 4
device  sio1 at isa? port IO_COM2 irq 3
device  sio2 at isa? disable port IO_COM3 irq 5
device  sio3 at isa? disable port IO_COM4 irq 9
# PCI Ethernet NICs.
device  de  # DEC/Intel DC21x4x (``Tulip'')
device  txp  # 3Com 3cR990 (``Typhoon'')
device  vx  # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device  miibus  # MII bus support
device  bfe  # Broadcom BCM4401 10/100.
device  dc  # DEC/Intel 21143 and various workalikes
device  fxp  # Intel EtherExpress PRO/100B (82557, 82558)
device  my  # Myson Fast Ethernet (MTD80X, MTD89X)
device  pcn  # AMD Am79C97x PCI 10/100 NICs
device  rl  # RealTek 8129/8139
device  sf  # Adaptec AIC-6915 (``Starfire'')
device  sis  # Silicon Integrated Systems SiS 900/SiS 7016
device  ste  # Sundance ST201 (D-Link DFE-550TX)
device  tl  # Texas Instruments ThunderLAN
device  tx  # SMC EtherPower II (83c170 ``EPIC'')
device  vr  # VIA Rhine, Rhine II
device  wb  # Winbond W89C840F
device  xl  # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Gigabit Ethernet NICs.
device  bge  # Broadcom BCM570x (``Tigon III'')
device  em  # Intel Pro/1000 (82542,82543,82544,82540)
device  gx  # Intel Pro/1000 (82542, 82543)
device  lge  # Level 1 LXT1001 (``Mercury'')
device  nge  # NatSemi DP83820 and DP83821
device  sk  # SysKonnect GEnesis
device  ti  # Alteon (``Tigon I'', ``Tigon II'')
device  wx
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device  ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
device  ex
device  ep
device  fe0 at isa? disable port 0x300
# Xircom Ethernet
device  xe
# PRISM I IEEE 802.11b wireless NIC.
device  awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device  wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device  an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device  ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device  le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
device  lnc0 at isa? disable port 0x280 irq 10 drq 0
device  cs0 at isa? disable port 0x300
device  sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop  # Network loopback
pseudo-device ether  # Ethernet support
pseudo-device tun  # Packet tunnel.
pseudo-device pty  # Pseudo-ttys (telnet etc)
pseudo-device md  # Memory "disks"
pseudo-device gif  # IPv6 and IPv4 tunneling
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf  #Berkeley packet filter
# USB support
device  uhci  # UHCI PCI->USB interface
device  ohci  # OHCI PCI->USB interface
device  usb  # USB Bus (required)
device  ugen  # Generic
device  uhid  # "Human Interface Devices"
device  ukbd  # Keyboard
device  umass
# USB Ethernet, requires mii
device  aue  # ADMtek USB ethernet
device  cue  # CATC USB ethernet
device  kue  # Kawasaki LSI USB ethernet
device  rue
options  NETGRAPH  #netgraph(4) system
options  NETGRAPH_ASYNC
options  NETGRAPH_BPF
options  NETGRAPH_ETHER
options  NETGRAPH_IFACE
options  NETGRAPH_KSOCKET
options  NETGRAPH_L2TP
options  NETGRAPH_MPPC_ENCRYPTION
options  NETGRAPH_PPP
options  NETGRAPH_PPPOE
options  NETGRAPH_PPTPGRE
options  NETGRAPH_SOCKET
options  NETGRAPH_TEE
options  NETGRAPH_UI
options  NETGRAPH_VJC
pseudo-device crypto
pseudo-device cryptodev
device        hifn
引用:
ip_nat.h.patch:

--- ip_nat.h.orig       Tue Feb  6 12:03:13 2007
+++ ip_nat.h    Tue Feb  6 12:03:35 2007
@@ -30,1 +30,1 @@
-#undef LARGE_NAT /* define this if you're setting up a system to NAT
+#define LARGE_NAT /* define this if you're setting up a system to NAT
@@ -39,1 +39,1 @@
-#  define NAT_SIZE 2047
+#  define NAT_SIZE 8191
@@ -46,1 +46,1 @@
-#  define RDR_SIZE 2047
+#  define RDR_SIZE  8191
@@ -53,1 +53,1 @@
-#  define HOSTMAP_SIZE 8191
+#  define HOSTMAP_SIZE 32767
@@ -60,1 +60,1 @@
-#  define NAT_TABLE_MAX 180000
+#  define NAT_TABLE_MAX 720000
@@ -67,1 +67,1 @@
-#  define NAT_TABLE_SZ 16383
+#  define NAT_TABLE_SZ 65535

TOP

下个试试

TOP

如果能开发出防网络尖兵内核的版本就好了   现在经常被扫描到  真痛苦

TOP

我要下。

不过暂时换了pfsense1.2,这个要先收藏起来。

TOP

下来试试

TOP

下个看看。。。

TOP

安逸
收费承接ROS路由远程可配置的各种设置
大猫猫和兔子的家
出售美国VPN,虚拟主机,要的PM。

TOP

内核还可以优化

TOP

已经放到生产环境了,用的30W核心。。。
看看我还挂不挂。。。
收费承接ROS路由远程可配置的各种设置
大猫猫和兔子的家
出售美国VPN,虚拟主机,要的PM。

TOP

发新话题